Видео

What an amazing machine!

Website is dead

yes.. pairing my cameras was/is ridiculous. I had a USB power supply for 3 years.. I did the panel puling and door seal hide and ran it along the head liner near the top of windshield..It was pretty well hid, I had a Garmin 66 W on the windshield and a Dash Cam Mini 2 on the back glass. Last month the 66 W was not shutting off like it did for 3 years , drained the suv's battery because I didn't day it for 3 days. I'm using the same power cord for the new Mini 2 on the windshield now but I ran the cable under the door sill to the rear seat passengers 12volt USB power supply. They are off when the ignition is off. While attempting to pair the new camera ..I had 4 cameras in "my devices" on my iPhone.. even after using "forget this device " over and over. I deleted the Garmin Drive app off my iPhone, shut it off for 5 minutes and then downloaded the app again. I still haven't paired the old Mini 2 and the new Mini 2 yet to my phone. I'm going to pair them with the other discounted from power.and don't try to ""NAME"" them like ( front or back ) that added another device to my phone..5 minute hook up and 30 minutes of upset trying to pair them....After every update too.......

Same problem here. You saved my life

Good video. Interesting you mention wanting your pipe perfectly level. I typically run my pipe with a bit of fall toward the drain/blow out. Since water condenses in the airline as the compressed air cools, it needs to have a way out. Putting some slant in the line lets the water run to the drain to be blown out.

Normal edge bander, Will u go to Atlanta exhibition?

$500???!!!!! For just the RapidAir kit! Holy crap. This can be made with PEX for less than $140

Great video on the VantEdge

You did not show how you actually fixed it, where the rod is supposed to go.

Good

Good

Thanks for this video! A lifesaver. Had the same issue and was about to take to a repair shop after trying everything. Was able to get the push rod back in by rotating the cylinder with pull rope and using a screw driver to slightly pry up the lifter. Started on first pull. Would also like to know how this happens.

Look great！I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price！（etc： Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...）

Look great！I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price！（etc： Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...）

What is the minimum width (mm) that a vane can be? Sorry, maybe I missed that.

useless video

Hello friend, you don't know what I was looking for a channel that would be dedicated to showing and informing about machines since it is not something so common, I congratulate you for your work, I am a carpenter and I have a machine very similar to this generic Chinese brand the only thing What is not available is the cleaning spray, the rest of the groups are the same, I have that problem at the beginning with the glue applicator roller, my MDF board collides with the roller and the glue does not appear as if it were paint applied with a roller, which is noticeable. The hairs, this leaves it ready because it touches the board with the roller.. I will try this solution from the beginning by regulating that skate Another question, which do you think are the best brands of gluing machines HOMAG, SCM, Biesse, the one with the least problems, thank you friend and I congratulate you for the channel, keep it up.

Where do you get bits for your groover

Great video on the VantEdge

Auto tool length setter

Did this sell?

Hi. Sir. I need. H help please let me know what time works one. This. I need. Help thank you. This. Machine. Have. Problem

hello sir i have a problem with osai controller can u help us please

Would that cause the motor to backfire with a popping sound when trying to crank

What file format is that SD card? I bought a 256GB for my Dash Cam Mini 2, and it work read it..

Can you make a video on how to operate the osai cnc?

So mine is about 1 year old, only used once. Wouldn't start so I removed cover. Push rod in place. After replacing the cover, it started very next pull, go figure

Is there an option for pusher/outfeed on the spectrum?

It would help if you showed how to fix it sir

Did you repair that pushrod yourself or take it in to dealer/shop?

Thanks for this! I just got a Excitech I’m learning to use. Had this alarm. Did you ever finish videos on tool offsets setting Z?

What is this machine used for ?

whats the smallest length and depth of panel size to run , say walls fillers or toe skins?

warranty?

how's the customer support?

cost?

I need enroute can you share me

Tonight, I was trying to do a test run on my portable backup generator: microwave versus computer! Who will win? And apparently the microwave won bc it made a sound that felt like a fuse could’ve blown

Nice video! about greasing, The recommendation says the pump should be greased every 3,000 hours, but I've seen others doing it every month. What could happen if it was over-greased?

We have the same issues! Nothing was helping.We will look at push rod.How could that happen?

How do you address a Motor Fault ( 0x 10) drive 5 (XB) teknic comm error? Also would love to see a video on squaring a multicam 3000

wow cool cnc how much $$$$

hi there i would like to know how can I get maintnance user manual for multicam router.

Great stuff! I hava a question... I have a pump that goes through vanes every 2-3 months due to blades exploding. I changed again this week and keep seeing grooves warn into them. I always clean it before installation and on occasion have had to get some caked on carbon off the inside of the pump. Why do they keep breaking?

Donga adapter will work with Mercedes ES 350 2013 ?

Great video!

Does it matter which one is line 1 lin line tool in line 3

Thanks so very much for this video. Helped alot!!! I was cutting cabinet doors and they were all 3/16" off on the Y axis and I was able to fix it. Thank you.

Curious what pressure you use when blowing dust out of these filters? Thanks.

Wow impressive !